SMART ebike - On-Board Computer; Shifting Gears; Gear Indicator; Kickstand

On-board computer
:
Button î
;
Display of functions
=
Speedometer
Speedometer = displays the current speed
in km/h (mph).
X
To change display ;: press button :
briefly.
Press the button to switch display ;
between:
R
trip meter DIST in km (miles)
R
odometer ODO in km (miles)
R
journey time CHRONO in hours and
minutes
R
average speed AVSPD in km/h (mph)
R
time CLOCK. Setting the time
(Y page 26)
i
Depending on the country, the speeds
and distances are displayed in either
"km/h" or "mph" and "km" or "miles".
X
To reset the values: press and hold but-
ton :.
The following displays ; are set to 0:
R
trip meter DIST
R
journey time CHRONO
R
average speed AVSPD
Shifting gears
:
Gear indicator
;
Twist-grip
A transmission with 3 gear ratios is inte-
grated into the smart ebike's drive. You
change gear by turning twist-grip ; on
the handlebars. Gear indicator : on
twist-grip ; displays which gear is
engaged.
X
Turn twist-grip ; until the gear you
require is engaged.
Gear indicator : shows the engaged
gear in red.
i
You can shift gears when the ebike is
stationary or when riding. The smoothest
way to change gears when riding is to
lighten the pressure on the pedals when
shifting gears.
Kickstand
G
WARNING
Riding the ebike with the kickstand down
can cause a fall. There is a risk of accident
and injury. Always kick up the kickstand
before riding off.
!
Parking the ebike on downhill slopes or
on soft ground can cause the ebike to fall
over and become damaged. Park your
ebike on level, firm ground, if possible.
On uphill or downhill gradients, always
Kickstand
29
>> Controls.
Z