CHAPTER 4
TROUBLESHOOTING
61 smarttech.com/kb/171166
Resolving issues with Apple devices
Issue Solutions
The display’s name doesn’t appear
in the list of available devices.
l Make sure your mobile device or computer is on the same network as the
display.
l If your display is using a wired network connection, try connecting it to a wireless
network.
l Make sure the display and computer are set to the correct date and time.
See the SMARTBoard 6000 and 6000 Pro series interactive displays
installation and maintenance guide (smarttech.com/kb/171167) and your
computer’s documentation.
l On your mobile device, turn Airplane mode on and then off on your mobile
device.
l Restart your mobile device.
NOTE
Restarting your mobile device can clear network address information that
your mobile device had cached. Restarting the mobile device can also
reinitialize audio and video encoders that might have stopped working
properly.
l On your computer, turn Wi-Fi off and then back on, or disconnect and then
reconnect the Ethernet cable.
l Restart your computer.
NOTE
Restarting your computer can clear network address information that your
computer had cached. Restarting the computer can also reinitialize audio and
video encoders that might have stopped working properly.
l Restart your display.
See the SMARTBoard 6000 and 6000 Pro series interactive displays
installation and maintenance guide (smarttech.com/kb/171167).
l If you’ve restarted your display and still don’t see the display’s name in the list of
devices, wait several minutes and then try to connect to the display again.
l Make sure your computer or device has the latest operating system software.
The display’s name appears in the
list of available devices but you’re
unable to connect to it.
Open the Screen Share app.
a. On the display, open the launcher.
b.
Tap Screen Share .
To Next Page
Loading...
Need help?
General
