SMART SBID-6065 - Using SMART Software on Connected Computers

CHAPTER 2
USING THE DISPLAY
27 smarttech.com/kb/171166
To view a connected computer’s input
1. Connect the computer to the display.
2.
Press the Input Select button on the front control panel until HDMI1, HDMI2 or DisplayPort
is selected.
Using SMART software on connected computers
After you’ve connected a computer to the display, you can use the SMART software to present
content and enable collaboration.
For information on SMART Learning Suite (including SMARTNotebook software), see
SMARTNotebook 18.
For information on SMART Meeting Pro software, see SMARTMeeting Pro 4.