Chapter 1
Welcome
smarttech.com/kb/171554 12
For more information about the front control panel, see Using the front control panel on page17.
Front connector panel
The front connector panel includes connectors for USB peripherals and a computer or other input source.
For more information about the convenience panel, see Connecting room computers and guest laptops on
page33.
Ambient light sensor
The ambient light sensor is located in the bottom-right corner of the display’s frame.
The ambient light sensor detects the brightness of the room and adjusts the screen’s brightness
accordingly.
Power status light
The power status is located in the bottom-right corner of the display’s frame.
The power status light indicates the display’s status.
Power status light Display status
Red Standby mode
Green Normal operating mode
Remote control and IR sensor
You can use the remote control to turn the display on and off, adjust display settings, and so on.
The IR sensor for the remote control is located in the bottom-right corner of the display’s frame.
For more information about the remote control, see Using the remote control on page18.
To Next Page
Loading...
Need help?
General
