SMARTfit PowerForce - Unpacking and System Components

PowerForce – User Manual
Radlabor GmbH | Heinrich-von-Stephan-Str. 5c | 79100 Freiburg | Germany
www.smartfit.bike | www.radlabor.de
2. After unpacking
✓ First read and follow these instructions!
✓ Unpack all materials very carefully!
✓ The PowerForce System is high sensitive electronic. So, handle all parts with highest
care
2.1 components
Check the content inside the suitcase
[1] 2x PowerForce sensor (left & right), with mounted transmitter (Accumulator included,
two protector caps mounted)
[2] 1x Base station (receiver)
[3] 1x Adjustment Tool
[4] 2x adjustment tools screws
[5] 2x crank – sensor screws
[6] 2x Accumulator Charger
[7] 1x Serial USB cable (Base station to PC)
[8] 1x USB License Dongle
[9] 1x 10mm Allen Key
[10] 1x 2,5mm Allen Key
[11] 1x 10mm Wrench
[12] 1x Calibration printout
2
1
1
8
7
3
4
5
6
9
10
11