Radlabor GmbH | Heinrich-von-Stephan-Str. 5c | 79100 Freiburg | Germany
www.smartfit.bike | www.radlabor.de
3. Software Installation
For the installation of the PowerForce software you need to download the software package on our
homepage:
http://www.smartfit.bike/en/download/
3.1 Install NI-DAQmx Driver
Before you install the IMAGO Record-Cycle Software, you must install the NI-DAQmx-Driver.
Click on the icon in the saved file and follow the setup instructions. The Installation will take some
minutes.
3.2 Install NI LabVIEW 2009 Runtime Engine Library
After installing the DAQmx Driver, you must install the NI LabVIEW Runtime Engine. This library is
necessary to read out the data from IMAGO.
Click on the icon and follow the setup instructions. The Installation will take some minutes.
3.3 Install IMAGO Records®
After the previous installation, you can install IMAGO Record. Therefore, you must open the
setup.exe and follow the setup instructions.
To Next Page
Loading...