ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 14 of 51
D. When “stop delay” time is 00:00:00 or repeat above-mentioned A procedure, select 02
TIMER STOP (01 TIMER START must be reselect if another time scheduled start is
needed), then 1#~8# lights will off in proper order and the extinguishing interval delay
can be set as 1s~300s. The light tower set begin stopping when all the lights off. (Picture
7,8)
NOTE: The auto timer mode will be canceled automatically when select other auto start
mode!