ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 17 of 51
5.5 AUTO SMS MODE
A. Press ，its indicator light on, and controller enters Auto mode. Meanwhile, the panel
display Auto Mode Select (Fig 1); Press and to select 02 Auto SMS Mode and
press or to confirm (Fig 2).
B. When SMS message module receives the start command, light tower set begin cranking
and flashlight is twinkling (if configured). Stop delay will be displayed twinklingly on the first
line of the second screen. (Fig 3).
C. If generator voltage and frequency has reached on-load requirements (Voltage ≥ on-load
voltage and frequency ≥ on-load frequency), all the lights will illuminate in proper order and
the illumination interval delay is 2s (can be set as 1~300s). (Fig 4,5)
To Next Page
Loading...
Need help?
General
