Smartgen ALC700 SERIES User Manual

ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 26 of 51
No.
Type
Description
11
Fail to Stop
If generator output electricity after the “ETS solenoid delay/
fail to stop delay” is over, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
12
Low Fuel Level
When controller detects the fuel lever is lower than the set
value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
13
Charge Alt Fail
When controller detects the charger voltage is lower than
the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
14
Battery Under Voltage
When controller detects the battery voltage is lower than the
set value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
15
Battery Over Voltage
When controller detects the battery voltage is higher than
the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
17
Flexible Sensor Low
When controller detects the sensor value is lower than the
minimum set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD. If the sensor name is configured by users as xxx, then
“xxx low” warn will be displayed on the LCD.
18
Flexible Sensor High
When controller detects the sensor value is higher than the
maximum set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD. If the sensor name is configured by users as xxx, then
“xxx high” warn will be displayed on the LCD.
16
Aux. input 1-4 Warn
When the controller detects auxiliary input ports 1-4
warning, it will send warning alarm signal and the
corresponding alarm information will be displayed on the
LCD. If the input port name is configured by users as xxx,
then “xxx warn” will be displayed on the LCD.
NOTE: The warning types of Aux. input are active only when they are configured by
users.

Smartgen ALC700 SERIES Specifications

General

Brand	Smartgen
Model	ALC700 SERIES
Category	Controller
Language	English