ENGLISH • 11
SETTING LANGUAGE AND VOLUME
This unit offers 3 language settings for audio prompts and reading results - English,
Spanish, or French - with volume control, or the audio option can be turned
completely OFF.
After setting the Date and Time, the screen will advance to setting the Language
and Volume.
LANGUAGE:
1. The display will show L1 and announce ‘English’.
2. Press the M button to scroll through the options until the
desired language is shown, L1 (English), L2 (Spanish),
L3 (French), or OFF.
NOTE: The language selected will default to the selected
language every time the device is powered on until a new
language is selected.
3. Press SET to conrm the selected language. Proceed to
setting the volume.
VOLUME:
4. The volume level bars will show on the left side of the
display.
5. Press the M button to increase the volume; you will hear an
audio prompt for each level. Continue to press M until the
desired volume is reached.
6. After selection, press SET to conrm and then START/
STOP to exit set-up and prepare for your measurement.
To Next Page
Loading...
