ENGLISH • 23
CARE & MAINTENANCE
other information which will assist the user’s appropriately qualied technical
personnel to repair those parts of equipment which are designated repairable
can be supplied.
Cuff Care & Maintenance
• The cuff may be spot cleaned with a mild-detergent as needed.
• To disinfect the cuff, wipe the inside (skin contact side) of the cuff using a cloth
lightly moistened with 70% - 90% ethyl rubbing alcohol and allow to air dry;
it is suggested to disinfect the cuff frequently when used in clinical settings or if
the cuff is contaminated in any way.
• Never attempt to iron or dry the cuff; if the cuff becomes wet, allow the cuff to
air dry completely before use or storage.
• Do not attempt to remove the tube and bladder from the nylon cuff as this may
damage the cuff.
• Take care not to forcefully bend or kink the tubing during storage.
• It is recommended the performance should be checked every 2 years or after
a repair. Please contact Customer Care at 866-326-1313.
• It is recommended to clean the cuff every 200 uses.
• The monitor can maintain the safety and per formance characteristics for
minimum of 10,000 measurements of three years.
• The cuff integrity is maintained after 1,000 open- close cycles of the closure.
To Next Page
Loading...
