If you select DAYS, then use the NEXT button to step through
each day of the week and the ▲ and ▼ arrow buttons to select
ON or OFF status for each day. Days selected to water will be
displayed at the top of the display.
If you select an INTERVAL schedule, push NEXT button. The
flashing number indicates the day interval for watering.
SmartLine
®
controller will allow an interval of 1 (every day) to
30 (water once every 30 days). After you have selected the
interval you want, push NEXT to set the day you want the inter-
val schedule to start on. Use ▲ and ▼ arrow buttons to select
start day at top of display.
If you select ODD/EVEN day scheduling, push NEXT button
and then use ▲ or ▼ arrow buttons to select watering on ODD
or EVEN days. If ODD is flashing on the display when you turn
the dial to another position, you have selected ODD. The same
is true for EVEN. When you return the dial to RUN, you can
view the next day that your schedule will run. The SmartLine
®
Controller will run ODD or EVEN programming at the next
available start time, even if it is on the same day that you set
up the schedule. If you are using an ODD schedule, the
SmartLine
®
controller will not water on the 31
st
day of a month
and February 29
th
of a leap year to prevent two consecutive
watering days (31
st
and 1
st
or 29
th
and 1
st
).
3.5 Set Omit Times/Days/Dates (Optional)
The omit settings are
used to set a watering
blackout period. For
example, if you live in a
municipality that restricts
outdoor watering
between 10:00 am and
6:00 pm, you can blackout that time period. If a watering pro-
gram in progress is paused for a blackout period, the
ORANGE LED will display during the pause. The watering
cycle will automatically resume at the end of the blackout peri-
od. Use the ▲ or ▼ arrow buttons to select OMIT:TIME,
OMIT:DAYS, and OMIT:DATES. You may choose any or all of
these omit options.
If you want a watering blackout for the same period each day,
select OMIT:TIME. Then push NEXT. A forward (>) arrow indi-
cates the beginning time for the blackout. Use ▲ and ▼ arrow
buttons to set beginning time. Then push NEXT. A reverse arrow
(<) indicates the end time for the blackout. Use ▲ and ▼ arrow
buttons to set ending time. The OMIT:TIME function will pause
any active watering program until the blackout period has
expired. Scrolling the beginning time (forward arrow) between
12:00 am and 11:50 pm causes NONE SET to appear and
clears the omit time.
If you want to omit a specific day or days each week from
watering schedules, select OMIT:DAYS with the ▲ and ▼ arrow
buttons. Then push NEXT. Display will show a day of the week
To Next Page
Loading...
Need help?
General