SMC Networks 25A-LEFS Series User Manual

- 11 -
Step motor (servo 24VDC) Ball screw drive
Note 1) The strokes shown in ( ) are produced upon receipt of order.
Note 2) The speed is dependent on the workload. Check the following “Speed-workload graphs” for the selected model.
Note 3) A reference value for correcting an error in reciprocal operation.
Note 4) Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and
perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 to 2000 Hz, when the actuator was tested in both an axial
direction and a perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Note 5) The "Power consumption" (including the controller) is for when the actuator is operating.
Note 6) The “Standby power consumption when operating” (including the controller) is for when the actuator is stopped in the set position
during operation.
Note 7) The "Momentary max. power consumption" (including the controller) is for when the actuator is operating.
This value can be used for the selection of the power supply.
Note 8) Only applies to actuators supplied with a lock.
Note 9) For the actuator with lock, please add the power consumption for the lock.
Weight
～600
601～700
701～800
801～900
901～1000
1001～1100
1101～1200
～1000
1001～1100
1101～1200
Basic type
High
precision
Basic type
High
precision
10 to 190
Controller
type:
LECP6
LECP1
LECPMJ
JXC91
Note2)
Speed
[mm/s]
Stroke
range
30 to 660
30 to 570
20 to 440
20 to 380
24 VDC±10%
5
225
113
75
Step motor(Servo 24V DC)
Non-magnetizing lock
□56.4
141
43
100
5 to 40
Linear Guide
Ball screw(LEFS40)、Ball screw+Belt（LEFS40L/R）
50 / 20
2
20
0.05 or less
0.1 or less
±0.015（Lead H：±0.02）
±0.02
3,000
10 to 220
10 to 250
23
60
2
50
10 to 300
10 to 300
10 to 300
10 to 300
10 to 250
30 to 1200
20 to 520
20 to 620
20 to 760
20 to 900
20 to 500
30 to 500
20 to 1000
30 to 780
30 to 930
30 to 1140
Lock unit
specifications
Type note8)
Holding force [N]
Power consumption [W] note9)
Rated voltage [V]
30 to 500
30 to 500
Guide type
Max.instantaneous power consumption [W]
note7)
20 to 440
20 to 380
10 to 190
Rated voltage [V]
Power consumption [W] note5)
24 VDC±10%
Incremental A/Bphase (800 pulse/rotation)
Operating humidity range [%RH]
Operating temperature range [℃]
10
20
Electric specifications
Motor size
Motor type
Encoder
Standby power consumption when operating [W]
note6)
30
90 or less(No condensation)
Positioning repeeatability [mm]
Lost motion[mm] note3)
lead [mm]
Impact/Vibration resistanc [m/s2] note4)
Actuation type
Driver
type
LECPA
Note2)
Speed
[mm/s]
Stroke
range
Max.acceleration/deceleration [mm/s2]
Actuator specification
Stroke [mm] Note1)
Work load
[kg] Note2)
Horizontal
LECP6/LECP1/LECPMJ/JXC91
LECPA
Vertical
10 to 220
65
55
25
150 to 1200
LEFS40
30 to 1200
Model
Model
Stroke(mm) 150 200 250 300 350 400 450 500 550 600
Weight(kg) 5.37 5.65 5.93 6.21 6.49 6.77 7.15 7.33 7.61 7.89
Additional weight for lock(kg)
LEFS40
0.53
Model
Stroke(mm) 650 700 750 800 850 900 950 1000 1100 1200
Weight(kg) 8.17 8.45 8.73 9.01 9.29 9.57 9.85 10.13 10.69 11.25
Additional weight for lock(kg)
LEFS40
0.53
2021-05-2010:32
DW913599

SMC Networks 25A-LEFS Series Specifications

General

Brand	SMC Networks
Model	25A-LEFS Series
Category	Controller
Language	English