SMC Networks EX260 Series User Manual

-35-

No.EX##-OMP0013-A
Accessories
○Connector cable
Suitable connector
SI unit
connector
Description Part number Specifications Manufacturer
EX9-AC010EN-PSRJ: 1 m
EX9-AC020EN-PSRJ: 2 m
EX9-AC030EN-PSRJ: 3 m
EX9-AC050EN-PSRJ: 5 m
EX9-AC100EN-PSRJ: 10 m
Connector: M12 straight at
one end and RJ45
at the other end
Cable with
communication
connector
PCA-1446566
Connector: M12 straight
Cable: 5 m
1
Fieldbus
interface
connector
Fieldwireable
connector
PCA-1446553
Connector: M12 straight
plug
EX500-AP010-S
Connector: M12 straight
Cable: 1 m
EX500-AP050-S
Connector: M12 straight
Cable: 5 m
EX500-AP010-A
Connector: M12 angle
Cable: 1 m
Cable with
power supply
connector
EX500-AP050-A
Connector: M12 angle
Cable: 5 m
PCA-1401804
Connector: M12 straight
Cable: 1.5 m
PCA-1401805
Connector: M12 straight
Cable: 3 m
2
Power
supply
connector
Cable with
power supply
connector
(for
SPEEDCON)
PCA-1401806
Connector: M12 straight
Cable: 5 m
SMC
○Seal cap
This cap is used to protect the M12 connector opening when the connector is not used.
When the "BUS OUT" connector is not used, the seal cap can keep the SI unit under IP67 rated protection.
(One seal cap will be attached to the SI unit when shipped from factory.)
Description Part No. Specification
Seal cap EX9-AWTS For M12 connector socket: 10 pcs.

SMC Networks EX260 Series Specifications

General

Brand	SMC Networks
Model	EX260 Series
Category	Recording Equipment
Language	English