Operation
Clearing the accumulated value
Factory setting
Display setting: Real-time flow rate ( )
Unit setting :
l/min ( )
Switch specification: Real-time switch output ( )
Output mode: Inverted output ( )
Flow rate setting value: Real-time flow rate Full range median value
Accumulated flow 0
Key lock mode: Unlocked ( )
Flow rate conversion conditions: 20°, 101.3kPa, 65% RH (ANR) ( )
Initializing the setting
Press the UP button
while pressing the
DOWN button.
The accumulated value clears
when the buttons are pressed
continuously for 5 seconds or
more.
In the initial setting mode
, press the UP button
and DOWN button for 2
seconds or more.
When the SET button is pressed, the
setting returns to the factory setting.
When the MODE button is pressed, the
setting changes to instead of being
initialized.
To Next Page
Loading...
