F
EATURES
AND
B
ENEFITS
3
6. Click on the SYSTEM menu-choice then click on LAN Settings when
it appears. On the LAN Settings page, enter the IP address, Subnet
Mask and Gateway IP Address for the switch then click on the APPLY
button.
No other configuration changes are required at this stage but it is
recommended that you change the administrator’s password before
logging out. To change the password click on the SYSTEM¬ Password
menu-choice and fill in all the fields on the Password Settings page before
clicking on the APPLY button. (see “Setting the Switch’s IP Address” on
page 16 for more information)
To Next Page
Loading...
Need help?
General
