SMC Networks SMCGS16-Smart User Manual

C ONFIGURING THE S WITCH
22
The Input/Output Bandwidth Limit field is a type-in box which accepts an
integer number in the range 1 to 100. The number specifies the percentage
of the total input bandwidth of the port that can be used before packets
are dropped or flow-control starts.
Web – Click PORTS, Rate Limiting. This page enables you to set the rate
limiting parameters for each port on the Switch.
Figure 14 Rate Limiting

SMC Networks SMCGS16-Smart Specifications

General

Brand	SMC Networks
Model	SMCGS16-Smart
Category	Switch
Language	English