What to do if my Smeg Hob shows ER03 error?
If your Smeg Hob displays the error code ER03, it indicates continuous key activation, often caused by water or a pan on the control panel. To resolve this, remove any water or the pan from the ceramic glass surface and control panel.
Why does my Smeg Hob beep when I turn it on but there is no error code?
If your Smeg Hob beeps upon ignition but shows no error code, the LIN cable might be damaged or poorly connected to the hood's electronic board. Check the connection and replace the LIN cable if necessary.
General| Number of Cooking Zones/Burners | 4 |
|---|---|
| Width | 72 cm |
| Control Type | Touch Control |
| Power Levels | 9 |
| Energy Efficiency Class | A |
| Material | Glass ceramic |
| Type | Induction Hob |
| Safety Features | Child Lock |
| Dimensions (WxD) | 720 mm x 510 mm |
| Power Supply | 220-240 V |
To Next Page
