Smeg HOBD472D - Technical Data

17. TECHNICAL DATA
Product identification
Type: 4300
Model: HOBD472D
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements to products. For this
reason, the text and illustrations in these
instructions for use may change without
warning.
Further information on the technical
data is available on the website:
www.smeg.com
MODEL HOBD472D
Total maximum power (hob and
hood)
7.62 Kw (basic setting)
Total maximum power (hob and
hood)
4.72 Kw
Total maximum power (hob and
hood)
3.72 Kw
Total maximum power (hob and
hood)
3.02 Kw
1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area 3 + 4 In bridge
Parameter Value Dimensions
(mm)
Working dimensions - 700 × 520 (W x
D)
Power supply
voltage/frequency
220-240 V, 50 Hz; 220
V, 60 Hz 2N~ 380-415
V, 50 Hz;
2N~ 380 V, 60 Hz
Electrical and heating element data
Cooking area
1,2,3,4
2100 W; Power Boost:
3000 W
210 x 190
1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area 3 + 4 In bridge
Parameter Value Dimensions
(mm)
Flexible cooking
area
1+2, 3+4
3000 W; Power Boost:
3700 W
210 x 390
Parameter Value Dimensions
(mm)
Weight of the device 21 kg
Number of cooking
areas
4
Heat source induction
18. MAINTENANCE -
REPAIR AND
CONFORMITY
• Make sure that maintenance on elec-
trical components is only carried out
by the manufacturer or by the service
technicians.
• Make sure that damaged cables are
only replaced by the manufacturer or
by the service technicians.
When contacting the service depart-
ment, please provide the following in-
formation:
• Type of fault
• Device model (Art./Cod.)
• Serial number (S.N.)
This information can be found on the
identification plate. The identification
plate is affixed to the bottom of the
device.
Information on the product pursuant
to EU regulation no. 66/2014
Reference standards:
EN/IEC 60350-2
EN/IEC 50564
This appliance has been designed,
manufactured and sold in compliance
with EEC Directives.
35