IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT
REPLACED BY THE MANUFACTURER OR AN AUTHORIZED
TECHNICAL SERVICE CENTRE.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MAL-
FUNCTION OF FAULT, THE EARTH REDUCES THE RISK OF
ELECTROCUTION BY PROVIDING THE ELECTRICAL CUR-
RENT WITH AN ALTERNATIVE, LESS RESISTANT PATH.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCON-
NECT THE MAINS POWER SUPPLY FROM THE WORK AREA.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTAL-
LATION COMPLIES WITH THE REGULATIONS IN FORCE
IN THE COUNTRY OF USE, AND THAT IT IS CORRECTLY
EARTHED.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MAL-
FUNCTION OF FAULT, THE EARTH REDUCES THE RISK OF
ELECTROCUTION BY PROVIDING THE ELECTRICAL CUR-
RENT WITH AN ALTERNATIVE, LESS RESISTANT PATH. THIS
APPLIANCE IS FITTED WITH A SUPPLY CORD CONTAINING
AN EARTH WIRE AND PLUG. FIT THE PLUG INTO A SUIT-
ABLE SOCKET, INSTALLED AND EARTHED IN COMPLIANCE
WITH THE LAWS IN FORCE IN THE COUNTRY OF INSTAL-
LATION.
AN INCORRECTLY CONNECTED EARTH WIRE MAY GENER-
ATE THE RISK OF ELECTROCUTION. IF IN DOUBT AS TO
THE CORRECT EARTHING OF THE APPLIANCE, CALL IN
A QUALIFIED ELECTRICIAN OR THE TECHNICAL ASSIS-
TANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED
TO THE APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR
THE SOCKET, CALL IN A QUALIFIED ELECTRICIAN TO FIT A
SUITABLE PLUG.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT
REPLACED BY THE MANUFACTURER OR AN AUTHORIZED
TECHNICAL SERVICE CENTRE IN ORDER TO AVOID ANY
RISK.
DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT
CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF
OVERHEATING OR BURNING, WITH CONSEQUENT FIRE
HAZARD.
48
USER INSTRUCTIONS
EN
To Next Page
Loading...
Need help?
General
