6
FEATURES
• Inverter-style wire feed synergic MIG welder, with two torches allows quick changeover time from steel to aluminum.
• Easy to read LCD display panel and single-knob for selection and adjustments.
• Multiple synergic curves allow you to weld a variety of materials and thicknesses.
• Preset synergic curves automatically provide the proper settings to each individual situation.
• Individual welding parameters and preset by material, thickness, wire type and size along with shielding gas type.
• LCD screen shows welding parameters such as current, voltage, recommended thickness, wire speed and wire diameter.
• Machine automatically sets heat, wire speed for multiple material thicknesses.
• MIG welding of steel, stainless-steel and MIG brazing of high-strength and Boron steels with standard steel torch.
• Welds 5356, 4047 and 5554 with standard aluminum push-pull torch.
• Spot weld and pause features with adjustable on time.
• Adjustable Arc Length, HSA, CRA, Inductance, Burnback, Soft Start, Pre Gas and Post Gas.
• Faster set up time and reduced production times.
• Over 30 years of industry-leading technical support by calling 800-ABC-WELD
DESCRIPTION OF EQUIPMENT
H
I
I
G
TORCH
TORCH
MIG225Ai
double pulse
DOUBLE WIRE FEEDER
INVERTER
!
WARNING
TORCH SELECTION
SWITCH
PUSH PULL
PUSH PULL
B
C
D
E
A
C1
F
To Next Page
Loading...
