76
D315 | D305 User Manual Customizing the Phone Settings
Turning call forwarding on
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click "On" after the forwarding event (Always, Busy, Timeout).
3. Click on "Apply" and "Save".
Turning call forwarding o
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click on "O" after the forwarding event (Always, Busy, Timeout).
3. Click on "Apply" and "Save".
Call completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "o".
Note: This function must be supported by your VoIP provider and/or your PBX.
On the phone
Turning on call completion
1. Press
> 2 Call Features > 2 Outgoing Calls > 4 Call Completion.
2. Press
or scroll down to the setting and press to change it from o to on:
4
Call Completion.
3. Press
briefly to return to the previous menu, press for two seconds to return to the idle
screen.
Turning o call completion
1. Press
> 2 Call Features > 2 Outgoing Calls > 4
Call Completion.
2. Press
or scroll down to the setting and press to change it from on to o:
4
Call Completion.
3. Press
briefly to return to the previous menu, press for two seconds to return to the idle
screen.
On the web interface
Open the phone's web interface > Advanced Settings page > Behavior tab > Phone Behavior section >
Call completion: Click the radio button on.
To Next Page
Loading...
