Snom D715 - Music on Hold; Conference; Initiating a Conference; Conference Screen Navigation

48
D715/snom 715 User Manual Using the Phone
◦ To connect to the held call currently on-screen, press or the line key to connect to it. Press
Hold
or the line key again to put it back on hold.
◦ To terminate a held call, put it on-screen, connect to it, and press
.
If you are connected to one call and the
Cnf.On
button is available, this indicates that there is at least
one other call on hold (Fig. 2). If you wish to connect to a held call, put the current call on hold by
pressing
Hold
or the line key and continue as explained above.
Music on hold
As of firmware version 8.7.3.8, firmware downloads include a music on hold that is saved locally on the
phone. The default setting for playing music to callers on hold is "off".
Changing the setting: See "Music on hold" on page 69.
Conference
The maximum number of participants is three.
Initiating a conference
1. Call the first intended participant and put him or her on hold.
2. Call the second intended participant and put him or her on hold.
3. Call the third intended participant if there is one.
Note: You do not need to put the last participant on hold before starting the conference.
4. Press
Cnf.On
to start the conference.
Conference screen navigation
Your input on the phone's keys will affect the call marked with
, i.e. an individual participant or the
entire conference.
First participant
Second participant
Press or on the navigation key - depending on your firmware version - to select individual
participants and to return to the conference screen.