Snom D725 - What to Do if Initialization and Registration Are Unsuccessful

17
D 725 | snom 720 User Manual Setting up the Phone
2. Next, you will be prompted in the language of your choice to select a time zone. This aects the
time shown on your display.
◦ Press the function key underneath
Jump
to move to the beginning of the next time zone.
◦ Press
to move up or down the list one item at a time.
◦ Press the function key underneath
Reduc
to show only those time zones where the selected
phone language is spoken.
◦ Press the function key underneath
More
to show all time zones.
◦ Press
to save the time zone preceded by .
3. Next, you will be prompted to select the tone scheme of a country. This aects the dial tone you
hear when you pick up the receiver. Dierent countries use dierent dial tones.
◦ Press
to move up or down the list one item at a time.
◦ Press
to save the tone scheme of the country preceded by .
4. The display shows the "Welcome" screen. Press any key to log on.
5. Enter the account number. Save with
.
Note: See "Entering numerals, letters, special characters, and symbols" on page 24
on how to enter numbers and letters.
6. Enter the registrar. Press
.
After successful registration you will see the phone symbol
and the registered account (identity) in
the identity line underneath the date/time bar:
Infobar with date & time
Identity line
Note: If you see the account on the display preceded by an empty square and
the phone does not work, the server may be down, either for servicing or due to a
malfunction. The registration and initialization should be completed as soon as the
server is up and running again. You may want to check with your administrator or your
provider if nothing happens within a reasonable amount of time.
What to do if initialization and registration are unsuccessful
Your network or your VoIP provider may require more login data than requested by the snom phone
during the initialization and registration process. This data is entered on the web interface of the
phone. Contact your network system administrator or your VoIP provider for more information.
1. When you have received all necessary data, open the phone’s web interface.
2. Open Configuration Identity 1 and enter any additional login information you have received from
your provider.
Note: A number of IP telephony service providers and a number of SIP PBXs require
settings that are dierent from snom’s standard factory settings. snom’s web page
lists numerous providers and PBXs that have been tested for interoperability with