EasyManua.ls Logo

Snom D725 - Automatically; Rejecting Anonymous Calls

Snom D725
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
D 725 | snom 720 User Manual Using the Phone
Automatically
There are three options for rejecting incoming calls automatically or automatically or to have them
forwarded automatically, either always or under certain conditions:
Deny List. Calls from phone numbers on this list will not ring on your phone; callers will hear the
busy signal. For further information on placing phone numbers on the Deny List, see Directory.
DND - do not disturb mode. All incoming calls will be forwarded to the number set in call
forwarding when busy; if there is no setting for call forwarding, callers will hear the busy signal.
Exception: Phone numbers designated VIP in your phone's directory will ring on your phone even
when DND is on.
1. Press
to activate DND.
2. Press
again to deactive DND.
Call forwarding. For further information, see 57.
Rejecting anonymous calls
With this setting you can make your phone reject calls from phones that are blocking or not
transmitting their numbers.
Please note: Calls from analog phone connections without caller ID will, most likely, be
received as anonymous calls. They will be rejected if you turn this function on.
Activating rejection of anonymous calls:
1. Press
.
2. Press 2 Call Features.
3. Press 3 Incoming Calls.
4. Press 1 to change setting "1
Reject anonymous" to "1 Reject anonymous".
5. Press
for two seconds to return to the idle screen.
Deactivating rejection of anonymous calls:
1. Press
.
2. Press 2 Call Features.
3. Press 3 Incoming Calls.
4. Press 1 to change setting "1
Reject anonymous" to "1 Reject anonymous".
5. Press
for two seconds to return to the idle screen.

Table of Contents

Other manuals for Snom D725

Related product manuals