Snom D725 - Using the phone; Making calls

44
D 725 | snom 720 User Manual Using the Phone
Using the phone
This section describes the functions of the phone with the factory default settings. If your phone was
installed and/or set up by someone else, the default settings may have been changed. Please check
with that person or company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web interface.
The default setting is "Number". You can change the setting at Preferences > General Information
> Number Display Style by selecting a dierent option from the drop-down list. See ... for more
information.
Making calls
See "Alphanumeric Keypad" on page 24 for information on input modes and entering letters,
numerals, and special characters.
Selecting identity for current outgoing call
See "Identities/accounts" on page 65 on how to configure identities.
If more than one identity is shown on the display, the one preceded by
is the outgoing identity for
the call and the number/name that will show on the callee’s phone. Use or to select another
identity.
Using dierent audio devices
Handset
• Pick up the handset, enter the phone number, and press
. OR
• Enter the phone number and pick up the handset.
Headset
Enter the phone number and press
or headset key.
Speakerphone
Enter the phone number and press the speaker key.
Handset or headset and speaker
1. Use the method for handset or headset use to dial.
2. When the call has been established, press
+Spkr
to allow other persons present in the room to
listen to the party on the other end. Press
-Spkr
to turn the speaker o.