Snom D862 - Connecting the Phone

12
D862 Short User Manual Setting up the Phone
After successful registration you will see the idle screen with the registered identity in the upper
left corner:
Note: If the account is preceded by a red dot and the phone is not
working, the server may be down, either for servicing or due to a malfunction. Press
the key underneath Notifications to see details.
The registration and initialization should be completed as soon as the server is up
and running again. You may want to check with your administrator or your provider
if nothing happens within a reasonable amount of time.
Correcting the clock
The phone receives the time and date from your NTP time server. If the time and/or date on the
display are incorrect, you may need to set the correct time zone in the phone manager.
1. Click Preferences, then Time & Date.
2. In Time, select the timezone from the drop-down menu of Time Zone and click Apply.
If the time is still incorrect, there may be a problem with the time server. Contact your network
administrator or your IP provider.
Time and date formats
The default settings are 24-hour clock, e.g. 17:35, and U.S. date format MM/DD/YEAR, eg.
11/23/2022. You can change both in the phone manager.
1. Click Preferences, then Appearance.
2. Click the slider of U.S. Date Format from On to Off if you want to change the date to the
European format DD.MM.YEAR, e.g. 23.11.2022.