Snom D862 - Setting up the Phone; Delivery Content; Attaching Footstand and Handset

8
D862 Short User Manual Setting up the Phone
Setting up the phone
Delivery Content
GNU
General Public License
Quick Installation
Guide
D862
• Base phone unit
• Footstand
• Handset
• Handset cord
• Ethernet cable
• Quick Installation Guide, GNU General Public Licence
Attaching footstand and handset
Note: Before attaching the footstand to the phone, plug the long end of the handset cord into the
connector labelled " " on the back of the phone and place the cord in the cable guide.
1. Place the top of the grooves on the footstand below the slideguides on the back of the phone.
2. Push the footstand upwards onto the slideguides until it locks into place.