Snom D862 - Getting to Know Your Phone; At a Glance

18
D862 Short User Manual Getting to Know Your Phone
Note: Be sure to write down your admin password and your HTTP user name and
password and store them in a secure place.
Without the administrator PIN, you will not be able to return the phone and the web
interface from user mode to administrator mode; many settings will be inaccessible.
Without HTTP user name and password you cannot open the phone's web interface.
You can set and change the data in the phone manager at any time.
1. Press the function key underneath Menu on the phone's display and select Help to look up
the phone's IP address.
2. Enter the IP address into the browser's address bar on a computer in the same network as
the phone.
3. If user or admin name and password have been set, enter them and click Authenticate; if
not, just click Authenticate.
Setting HTTP user name and passwordSetting HTTP user name and password
1. Click Network in the left lateral menu.
2. Click Advanced.
3. Scroll down to HTTP Server and set the User name and Password in the respective text
fields.
• User name. Valid values are character strings of letters and numerals, e.g. john or jh24.
• Password. Text string.
4. Select the authentication scheme to be used by clicking on or off on the toggle switch.
• Basic scheme: off.
• Digest Authentication Scheme: on. This is the more secure option and the default setting.
Setting user/admin mode on the phoneSetting user/admin mode on the phone
1. In the Main menu, select System.
2. If the phone is running user mode (i.e., administrator access is off], press / to change the
setting to on. You will be prompted to enter the administrator access PIN. Enter the PIN and
press Confirm.
3. If the phone is running admin mode (i.e., administrator access is on], press / to change
the setting to off.
4. Press Back to return to the main menu.