21
D862 Short User Manual Using the Phone
Using the phone
This section describes the functions of the phone with the factory default settings. If your phone
was installed and/or set up by someone else, the default settings may have been changed. Please
check with that person or company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web
interface. The default setting is "Name + Number". To change the setting, click Preferences in the
left lateral menu, then Appearance. In the Interface elements section, select an option from the
pull-down menu Number Display Style. The other options are Full contact, name, number, and
number + name.
Making calls
Selecting identity for current outgoing call
Your current outgoing identity is shown on the left side of the status line. To select another
configured identity, press / on the navigation key.
Using different audio devices
HandsetHandset
• Pick up the handset, enter the phone number, and press OR
• enter the phone number and pick up the handset.
HeadsetHeadset
• Enter the phone number and press .
SpeakerphoneSpeakerphone
• Enter the phone number and press Dial or .
To Next Page
Loading...
