Snooper S7000 - Home; To change the home location; To delete the home location

23 • UK
Return to contents
3.3.1 Home
You can navigate easily and quickly from a previous journey or destination to your home, by personalising S7000 so that a route can
be calculated by pressing just a few buttons.
3.3.2 Setting the ‘Home’ Destination
 Press the centre of the display to enter the ‘Navigate to’ menu.
 Press the ‘Home’ icon.
The rst time the ‘Home’ function is used an information screen is
displayed saying ‘Set Home? Press ‘OK’ in the information window
to continue, press ‘CANCEL’ to exit. If ‘Home’ has already been set it
can be edited in My Favourites – refer to section 4.4 on page 48
.
 You can search for your address by using one of the following options:
‘Find address by city’ or ‘Find address by post code’. Please refer to 3.1 and 3.2 above on how to use these functions.
 Once you have entered the ‘Home’ destination, a new field is available for you to ‘Name’ the destination.
 Press ‘Name’ and a keyboard will be displayed with the road name you selected.
 Press the ‘Arrow’ key to erase this data then input the new name using the keyboard.
Please note: You can enter a new name for the home destination using up to a maximum of sixteen characters.
 Press ‘Save’ once you have entered the name.
 Once your home address has been saved, S7000 will be able to calculate a route to this address.
3.3.3 Using the ‘Home’ Function
 To calculate a route:
 Press the centre of the display to enter the ‘Navigate to’ menu.
 Press the ‘Home’ icon.
S7000 will display details of the destination and offer a ‘Go’ button and a ‘Route Option’ button. Press ‘Go’ to begin your journey.