RIGHT-HAND SIDE OF MACHINE
STORAGE POSITION
PROPER POSITION FOR USE
SAFETY BAR
24”
YOU MUST NOT OPERATE THIS DEVICE UNLESS:
AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO
DEATH OR SERIOUS INJURY.
0323897
1.
2.
YOU HAVE BEEN TRAINED IN THE SAFE OPERATION OF THIS
DEVICE AND HHHH
YOU KNOW AND FOLLOW THE SAFETY AND OPERATING
RECOMMENDATIONS CONTAINED IN THE MANUFACTURER'S
MANUALS, YOUR EMPLOYER'S WORK RULES, AND APPLI-
CABLE GOVERNMENTAL REGULATIONS. HHHHHHHH
DANGER
DANGER
300700
SHEARING HAZARD/CRUSHING HAZARD
Death or serious injury might result from
having body parts sheared or crushed as the
platform descends. Keep away from closing
scissor arms and keep out from under the
platform as the platform comes down.
0372061
TORQUE
·
90-100 Ft. Lbs.122-135 N m
Lug Bolts/Nuts
Check Every 30 Days
0372061
TORQUE
·
90-100 Ft. Lbs.122-135 N m
Lug Bolts/Nuts
Check Every 30 Days
EMERGENCY OPERATION
1. EMERGENCY LOWERING
In the event of total power failure pull the emergency lowering handle
[A] mounted at the front of the chassis until the platform starts to
descend. Once the platform is lowered the handle can be released.
2. TOWING OR PUSHING THE MACHINE
Free-wheel the Drive Motors
DANGER
A runaway machine can cause death or Serious Injury. Do Not
proceed unless the machine is on a level surface or is attached
to an object that can hold the machine on a slope.
CAUTION
The machines Drive motors will be ruined if the machine
is pushed or towed faster than 3.2 kph (2 mph).
In order to push or tow the machine the following steps
MUST be taken.
Open the free-wheeling valve [A] by turning counterclockwise until the
knob stops.
Release the Brakes
To release the brakes, pump the hand pump [B] 5 - 10 times. The brakes
will now be released and the machine is ready to be pushed / towed.
Resetting the Brakes
Once the machine has been safely pushed / towed it is IMPORTANT to
re-apply the brakes by pulling the re-set valve [C] and close the free-
wheel valve [A] by turning fully clockwise.
A
B
C
Free-wheel
Valve
Hand
Pump
Brakes Re-Set
Valve
13601-1
A