3. Specifications
n
Specifications
The S3970RT / S3370RT / S2770RT se ries ma chines are scis sor-sup ported el e vat ing work plat forms
built to con form to the fol low ing stan dards.
OSHA Para graph 1910.67 Ti tle 29, C.F.R., Ve hi cle-Mounted El e vat ing and Ro tat ing Work Plat forms - La -
bour.OSHA Para graph 1926.556 Ti tle 29, C.F.R., Ae rial Lifts - Con struc tion.Aus tra lian Stan dard
AS1418-10(Int) 2004 El e vat ing Work Platforms.
S3970RT, S3370RT & S2770RT – 13865-1 Rev A page 3 - 1
SPECIFICATIONS S3970RT
Nominal working height (wheels)
13.5m 44.2'
Nominal working height (stabilisers)
13.81 45.3'
Roll out deck size
1200mm 48”
Drive speed (below 2.4m)
0 to 4.5kph 0 to 2.8mph
Drive speed (above 2.4m)
0 to 0.35kph 0 to 0.22mph
Safe working load - Main deck
(Roll out deck not extended)
350kg 771lbs
Safe working load - Main deck
Safe working load - Roll out deck extended
230kg
120kg
507lbs
264lbs
Platform size
2.73 x 1.65m 8’ 11” x 5’ 5”
Stowed height
2.95m 9.6'
Stowed height (hand rails folded down)
2.15m 7'
Overall length
3.36m 11’ 0”
Overall width
1.77m 5' 9"
Gradeability
30%
Lift time
50 seconds
Turning radius (inner)
2.38m 7’ 8”
Turning radius (outer)
4.75m 15’ 6”
Maximum wind speed (12.5m/s)
45km/h 28mph
Insulation rating
Nil
Tyres - Poly filled loader lug
27" x 10.5" x 15"
Overall weight
3790kg 8355lbs
Ground clearance
350mm 13.8”
Maximum sound level at platform
86db
Stabiliser maximum load
2075kg 4574lb
Maximum chassis inclination
2.5
O
/4
O
n
General Specifications, Standard Machine S3970RT