Apple: Connect Apple iOS Device or Mac OS Device in Basic Mode
In this mode the scanner functions and communicates similar to a key-
board. Therefore, scanner will work with Safari, Notes, and any other
application that support an active cursor.
1. Power on the scanner. Make sure the scanner is
discoverable (unpaired). The Blue light blinks fast.
2. Start a Bluetooth device search.
• Settings | Bluetooth: Turn on Bluetooth and search for device.
• Mac OS: Click System Preferences | Bluetooth. A Bluetooth device
search will begin.
3. In the device list, tap on CHS [xxxxxx].
4. The scanner will connect to the Apple device.
5. The scanner will beep once after it has connected.
Now you are ready to scan barcodes!
To use the virtual keyboard while the scanner is connected, double tap
on the power button (similar to double clicking a mouse).
To connect to a new device or use a different prole (mode) on
the same device, you must rst unpair the scanner (see page 22).
11
To Next Page
Loading...
