Vibrate Meaning
Vibrate Data successfully scanned
Command Barcodes are available on pages 43-46 to modify the
LED, beep, and vibrate settings.
If you are using a scanner-enabled application, typically the
application provides settings for LED, beep, and vibrate settings.
Conguration Settings
Time after powering on
Scanner
Bluetooth mode
0-5 minutes Discoverable and connectable
5 minutes
If connection is not made, scanner
powers off
2 hours
If your scanner is connected but not
used it will power off in 2 hours.
When trigger button is pressed the
timer is reset.
26
To Next Page
Loading...
