Socket SOCKETSCAN S800 - Scanning Barcodes

SCANNING BARCODES
7
After connecting the SocketScan to your device, open an application.
Place the cursor where you want to enter the scanned data.
1. Hold the SocketScan a few inches from the barcode.
2. Aim, press and hold the trigger button.
By default, the SocketScan will beep, vibrate, and the side LED will
ash green to conrm successful scan.
SocketScan S800
~4” to 8”
scanning distance
SocketScan S850
~6” to 12”
scanning distance