25
Beep Pattern Sound Meaning
Low-High Tone Power On
High-Low Tone Power Off
High-High Tone
Power Supply detected and scanner started
charging
1 Low Beep
Scanner has toggled on-screen keyboard
or keyboard toggle feature is enabled (iOS
devices only)
1 Beep
Scanner connected to device and is ready to
scan barcodes
1 Beep Data successfully scanned
2 Beeps (same tone) Scanner disconnected
1 Long Beep Scanner gave up searching for a host
3 Beeps
(escalating tone)
Scanner has been recongured (the command
barcode was scanned successfully)
3 Beeps (escalating
tone followed by
long tone)
The command barcode did NOT work! (Verify
if the command barcode used is valid for your
scanner and try again)
To Next Page
Loading...
