SoClean 3

G E NE R AL TR O U B L E S H O OT I N G
Replace with a new genuine Filter.
The Filter is expired or
counterfeit Filter is
installed.
This icon is solid amber
on the Control Panel
Open and securely close the Filter door.
This icon is solid amber
on the Control Panel
The Filter door
may be open.
Check that your sleep equipment hose has been properly placed
into the Hose Slot and the Lid is fully closed.
There may be an issue
with the sleep equipment
hose detection.
This icon is solid
amber on the
Control Panel
The Lid may
not be closed.
Check to see if the Lid is fully closed.
Your sleep equipment
hose may be incompatible.
Some sleep equipment hoses may not be compatible with your SoClean 3.
Contact SoClean Customer Care.
SoClean 3 will
not operate a
Maintenance
Cycle or Fresh
Air Cycle
The warning
sign appears
and all three
buttons flash
three times
Your device has
not been activated
Complete steps on page 26.
User attempted to defeat
the hose Detect feature.
Do not attempt to defeat the Hose Detect feature.
Wait a few seconds for the hose to be detected.
If the hose is not detected, the light will turn solid amber.
The SoClean 3 is in the
process of detecting
the hose status.
This icon is flashing
amber on the
Control Panel
It’s the first time SoClean 3
was powered on or there was
a loss of power to the device.
Open and close Lid.
Order a replacement Filter.
(See page 17 for details.)
This icon is flashing amber
on the Control Panel
Time to order
a new Filter.
This icon is
flashing amber
when starting a
Maintenance or
Fresh Air Cycle
SOLUTIO NSPROBL EM POSSI BLE CAUSESYOU SE E
General Troubleshooting
42 43