socomec COUNTIS E27 - Example: Setting the Communication Address

16 EN
COUNTIS E27/E28 - 545881A - SOCOMEC
9.1.3. Example: setting the communication address
In "SETUP 2" mode (see page 13), go to the "IP address 1" screen
Example: changing the communication address to IP 007.
> 3s
x1
Default Ethernet settings (Eth SdEF)
x1 Conrm
Y=Save changes and exit
N=Exit without saving
C=Continue without saving
x1
x1
x2
x1
x5
x1
x5
x1
x1
IP address 2
IP address 3
IP address 4
Netmask 1
Netmask 2
Netmask 3
Netmask 4
Gateway 1
Gateway 2
Gateway 3
Gateway 4
Partial Energies Reset
XX = default value