socomec DATALOG H80 - Adding Devices to DATALOG H80;H81; Auto Discovery of Devices

13
EN
DATALOGGER H80-81 - 546226A - SOCOMEC
4.3.2. Adding devices to DATALOG H80/H81:
To add devices, the user can right mouse click on the root of the tree (devices tab) to access 2 options:
• The purpose of the "Auto-discovery of devices" function is to identify all devices connected to DATALOG H80/
H81. It allows users to simplify adding devices by scrolling through all devices in DATALOG H80/H81.
• The “Add a device” function allows users to create devices, one by one.
4.3.3. Auto discovery of devices
This function allows users to auto-discover devices connected to DATALOG H80/H81:
• New device: New devices compared with current conguration
• Modied device: Existing devices in the current conguration, but with some changed settings
• Device in conict: Device for which the conguration conicts with others (example same IP address for
gateways)
• Device not found: Devices not found at the launch of the auto-discovery process, even though they are in the
previous conguration
By starting the “Auto-discovery of devices” function, all devices found, classied by gateway, will be presented to
the user.
The user can individually select (check / uncheck) devices that he wishes to update in the conguration of
DATALOG H80/H81.