socomec DATALOG H80 - Setting the Properties of the Variables (for the Following Types: Status)

19
EN
DATALOGGER H80-81 - 546226A - SOCOMEC
4.4.4. Setting the properties of the variables (for the following types: Status)
The properties of the variable selected from list (2) are editable in the sidebar (4).
For each variable, the user can set:
• In the “General” tab
- Name: A variable can be renamed
- Input: State the device input
- Deactivated: A set variable can be manually deactivated
• In the “Data acquisition” tab
- Device: Setting can only be edited in the “Device” tab
- Data: This setting cannot be modied
- Data polling: The data collection period for the variable can
be set (steps of 10" minimum)