socomec DATALOG H80 - Options

24
EN
DATALOGGER H80-81 - 546226A - SOCOMEC
4.7. Options
This option allows users to dene what type of conguration should be applied to DATALOG H80/H81 when
managing the conguration on the home page of this setting tool.
The user has 2 options:
1. update the conguration setting for DATALOG H80/H81 only (identication of DATALOG H80/H81,
SMTP mail server and the remote server settings, conguration of the activity report). Applying this type
of conguration is faster than a full conguration, particularly when a very large number of devices (several
hundred) are connected to DATALOG H80/H81
2. full update of the conguration of DATALOG H80/H81 (conguration of the DATALOG H80/H8 settings
as well as the conguration of the devices and associated variable properties). Applying this type of
conguration is longer than a limited conguration, but essential if the user has to change the settings of
devices connected to DATALOG H80/H81.
To force a full update of the conguration, the user should tick the option (as shown in the diagram below). By
default, the option is checked.