socomec SIDER - Mounting Orientation; Assembly of Customer Mounted Accessories

8
EN
SIDER - 546418A - SOCOMEC
3.3. Mounting orientation
1250A to 3200A Recommended Not Allowed OK OK
CAUTION
Always install the product on a flat and rigid surface.
3.4. Assembly of customer mounted accessories
DANGER
Never handle any customer mounted accessories while there may be the risk of
voltage being or becoming present.
3.4.1. Connection kits for SIDER from 2000 to 3200 A
Version*
n°
Maximal rating without derating
(1)
Minimum Cu bar
section
(1)
+ +
708 lb-in 80 Nm
included with 3200 A
product as standard
708 lb-in
80 Nm
708 lb-in
80 Nm
Washer
MOY.M M12
NFE 25 511
H M12
1 2 3 Cu 2619 1200 2629 1200 2639 1200
01 2000 A 2500 A 2500 A 2 x 100 x 10 - - - H M12-35 6.8 - 6 x 12 x 6 x
02 2000 A 2500 A 2500 A 2 x 100 x 10
H M12-55 6.8 - 3 x 6 x 3 x
03 2000 A 2500 A 2500 A 2 x 100 x 10 H M12-55 6.8 - 5 x 10 x 5 x
04 2000 A 2500 A 3200 A 3 x 100 x 10 - - H M12-35 6.8 - 3 x 3 x -
05 2000 A 2500 A 3200 A 3 x 100 x 10 - - H M12-45 6.8 - 3 x 6 x -
06 2000 A 2500 A 2900 A 3 x 100 x 10
H M12-65 6.8 - 3 x 6 x 3 x
07 2000 A 2500 A 3200 A 4 x 100 x 10 - - H M12-45 6.8 - 6 x 6 x -
08 2000 A 2500 A 3200 A 3 x 100 x 10 H M12-65 6.8 - 5 x 10 x 5 x
Note: Max Cu bar width Ith =100mm - Reference numbers and quantity given above are for one connection and per pole.
(1) Conditions of use of these products may lead to a derating.
I th = 2000 A1
I th = 3200 A
3I th = 2500 A2
ref. 2901 3201 ref. 2901 3251 ref. 2901 3321
Version
01
Version
04
Version
02
Version
03
Version
05
Version
08
Version
06
Version
07