SOFAR 3K~6KTLM-G2 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
for 5 minutes at least before carrying out any maintenance or repair
work.
Inverter should work again after removing any faults. If you
need any repair work, please contact with the local authorized
service center.
Can’t open the internal components of inverter without
authorized. Shenzhen SOFARSOLAR Co., Ltd. does not take any
responsibility for the losses from that.
EMC / noise level of inverter
Electromagnetic compatibility (EMC) refers to that one electrical
equipment functions in a given electromagnetic environment without any trouble
or error, and impose unacceptable effect upon the environment. Therefore, EMC
represents the quality characters of an electrical equipment.
The inherent noise-immune character: immunity to internal electrical noise.
External noise immunity: immunity to electromagnetic noise of external system.
Noise emission level: influence of electromagnetic emission upon environment.
Electromagnetic radiation from inverter may be harmful to
health!
Please do not continue to stay around the inverter in less than 20
cm when inverter is working.
1.2. Symbols and signs
Caution of burn injuries due to hot enclosure!
You can only touch the screen and pressing key of the inverter
while it’s working.
PV array should be grounded in accordance to the requirements
of the local electrical grid operator!
We suggest that all PV module frames and inverter are reliably
grounded to protect the PV system and personnel security.
Ensure input DC voltage < Max. DC voltage. Over voltage may
cause permanent damage to inverter or other losses, which will not
be included in warranty!
Signs on the inverter
There are some symbols which are related to security on the inverter. Please