80-136KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
Keep balance when lifting the inverter, avoid to crash on wall
or other objective
Stop working in bad weather condition such as raining, heavy
fog, winding
4.6. Installation
4.6.1 Installed on wall：
Step 1: Placed the rear panel on the mounting wall, determine the mounting
height of the bracket and mark the mounting poles accordingly. Drilling holes by
using Hammer Drill, keep the hammer drill perpendicular to the wall and make
sure the position of the holes should be suitable for the expansion bolts.
Figure 4-8 Drilling holes on the mounting wall
Step 2:Insert the expansion bolt vertically into the hole；
To Next Page
Loading...
