80-136KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
incorrect is not including in the warranty.
Figure 5-2 Recommend DC cable size
Copper cable cross section area(mm
2
)
Step1: Find the metal contact pins in the accessories bag, connect the cable
according below diagram (1.Positive cable, 2. negative cable);
Figure 5-8 DC cable connection(1)
Step 2: Crimp the PV metal contact pin to the striped cable using a proper crimping
pliers;
Step 3: Insert wire into the connector cap nut and assemble into the back of male
or female plug, When you heard a “click”, the pin tact assembly is seated correctly.
(3. Positive Connector, 4. negative connector);