Sofar HYD5000-ES - Page 22

22 / 47
1)Set system time
System time format is “20YY-MM-DD-HH-MM-SS”, press “Up” or “Down” to change the 1
st
digit, press “OK” to switch
to next digit, press “Ok” to complete setting. When system time setting is complete, “Set country” will pop up.
2)Set country
Press “Up” or “Down” to select a country, press “Ok” to complete the country setting. When country setting is
complete, “Set battery type” will pop up.
Code
Country
Code
Country
Code
Country
00
Germany VDE4105
11
France
22
Europe General
01
CEI-021 Internal
12
Poland
23
CEI-021 External
02
Australia
13
Germany BDEW
24
Cyprus
03
SpainRD1699
14
Germany VDE0126
25
India
04
Turkey
15
CEI-016 Italia
26
Philippines
05
Denmark
16
UK G83
27
New Zealand
06
Greece Continent
17
Greece island
28
Brazil
07
Netherland
18
EU EN50438
29
Slovakia VSD
08
Belgium
19
IEC EN61727
30
Slovakia SSE
09
UK G59
20
Korea
31
Slovakia ZSD
10
China
21
Sweden
32
CEI0-21 In Areti
CAUTION
It’s very important to make sure that you have selected the correct country code
according to requirements of local authority.
Please consult qualified electrical engineer or personnel from electrical safety
authorities about this.
Shenzhen SOFARSOLAR Co., Ltd. is not responsible for any consequences arising
out of incorrect country code selection.
3)Select battery type
Press “Up” or “Down” to select your battery type, then press “Ok” to complete the battery type setting.
If you’re using “1. PYLON”, “2. DARFON”, “4. General Lithium”, “5. Alpha. ESS” or “6. SOLTARO” battery types,
congratulations, inverter’s first-time setup is complete. Please press “OK” to enter the main interface.
But if you’re using “3. DEFAULT” battery type. We need more information regarding your battery.