Sokkia SET530R/R3 User Manual

153
27. STANDARD EQUIPMENT AND OPTIONAL ACCESSORIES
• Because all Sokkia reflecting prisms and accessories have standardized
screws, it is possible to combine these prisms, accessories, etc. according to
your objectives.
• The following are all special accessories (sold separately).
• Because these targets(*2) are coated with fluorescent paint, they reflect when
there is little light.
%
• When using a reflecting prism equipped with a target for distance and angle
measurements, be sure to direct the reflective prism correctly and sight the
center of the prism target accurately.
• Each reflective prism(*1) has its own prism constant value. When changing
prisms, be sure to change the prism constant correction value.
• To use the triple prism assembly AP31 or AP32 as a single prism for short
distance measurements, mount the single reflective prism AP01 in the center
mounting hole of the prism holder.
27.3 Target System
30R.book 153 ページ ２００３年１２月１６日 火曜日 午後５時１５分

Sokkia SET530R/R3 Specifications

General

Type	Total Station
Accuracy	±(2 mm + 2 ppm)
Laser Pointer	Yes
Waterproof/Dustproof	Yes
Operating Temperature Range	-20 °C to +50 °C
Display	LCD
Angle Accuracy	2"
Distance Range with Reflector	3, 000 m