4.1 ELECTRICAL EMERGENCY NORMS
- Avoid working with cables that are in any way deteriorated, and make sure to correctly
connect the AC phases and earth on a certified plug.
- Never wrap ground and/or torch cables around the operator’s body.
- Avoid operating in humid or wet places without the proper precautions.
- Avoid operating if the machine protective panels (sides and cover) have been removed in
order to grant the safety of both the operator and the system.
4.2 ANTIFIRE EMERGENCY NORMS
- Equip the workspace with proper fire extinguishers and periodically check the efficiency.
- Position the generator on a solid and horizontal surface making sure of the presence of
good aeration. Do not obstruct the front and rear panel; this will let the machine overheat.
- Follow all the regulations applicable when welding has to be carried out on containers of
lubricants or flammable substances.
5. SYMBOLS DESCRIPTION
It’s forbidden to dispose electric
waste together with other
ordinary waste. Please take
care of our environment.
To Next Page
Loading...