EasyManua.ls Logo

Sol SOL-ONE - UV LED Sterilization; Moodlighting Demo Mode; Ionizing Unit Control; Color Blending for Lighting

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Manual V3.2_iOS 22
5.6 TURN ON/OFF THE UV LED
By turning the UV LED on/off you turn the air sterilizing function on/off..
5.7 TURNING ON/OFF THE MOODLIGHTING DEMO
If you turn this function on, the device’s moodlighting will change automatically. If you turn it
off, the actual color will remain.
The changing of the lighting will be shown only if the RGB LED is turned on.
5.8 TURN ON/OFF THE IONIZING
You can turn the ionizing unit on/off. It will work only if the ionizing unit is placed in the top
part (chimney).
5.9 COLOR BLENDING
By using the color blending slider, you can set the color you would like to be shown.
The change of the lighting will be shown only if the moodlighting is turned on.
When you turn the moodlighting demo on, the sliders will remain where they are set to be.
When the demo function is turned off, the actual color will be shown.

Other manuals for Sol SOL-ONE